How to Wirelessly Charge your iPhone 8/X?

How to Wirelessly Charge your iPhone 8/X?


To correctly charge your iPhone 8/X wirelessly, follow these simple steps:

Step 1: Connect the charger to the power source. You can use the power adapter that came with the charger or any other adapter that the charger’s manufacturer recommends.

Step 2: Place the charger on a flat surface. You may also want to read the manufacturer’s instructions on how to use the charger.

Step 3: Place the iPhone on the charger at the center-most location. Ensure that the device display is facing up. Your device should start charging seconds after you place it on the charger.


How to Fix Wireless Charger not Working on the iPhone 8/X?

If you complete the above steps correctly and minutes later the device has still not started charging, the following are just some of the solutions you can try.
Restart the iPhone

Your first course of action when the iPhone doesn’t charge wirelessly is to restart the device. A restart is a simple solution that can fix software glitches that could be interfering with the charging process. Follow these simple steps to restart your device:

Step 1: Press and hold the Power button until you see the “Slide to Power Off” the option appears on the screen. For the iPhone X, hold down the Volume Up or Volume Down button and the Side button at the same time.

Step 2: Slide the power icon on the screen to the right to turn off the device completely.

Step 3: Now press the Power or Side button (for iPhone X) until you see the Apple Logo on the screen. Now try to charge the device again.You may also like:Gihosoft iPhone Data Recovery

Must Read:Gihosoft Free Android Data Recovery

Must Read:Jihosoft iTunes Backup Unlocker


Take Off the iPhone’s Case

Sometimes the iPhone’s case can interfere with wireless charging, especially if it is too thick. If you think the case may be the cause, remove it and then try charging the device again. It may also be a good idea to go for thinner cases in the future to avoid this problem.


Make Sure the Charger is Plugged in

Just like failing to place the phone on the charging pad correctly, the whole problem could be caused by a charging pad that is not plugged in. So, take a moment to ensure the charging pad is plugged into the power source.
Update the iPhone

Because the wireless charging feature was implemented as a feature of the iOS firmware, it is possible that the device is failing to charge correctly simply because the iPhone is not updated. You can update the device by following these very simple steps.

Step 1: Check for the availability of a software update by going to Settings > General > Software Update.

Step 2: If an update is available, tap “Download & Install” and wait for the process to be completed.

If you see “Your iPhone is Up to date” and a software version number, your device is updated.


Make Sure Charger is Qi-Enabled

For the iPhone 8/X, it is important that the charging pad you use be Qi-enabled. Any other charger may not work correctly. So when purchasing a charger, make sure that it is Qi-enabled or it will not work with your device.


Get a New Charger


Jihosoft Giveaway Alert:

iPhone Backup Extractor - Extract Data from iPhone Backup

The best iPhone Backup Extractor Free software to extract photos, text messages, contacts, voice memos, note, WhatsApp, Viber and etc from iPhone/iPad backup.

You may also like:Gihosoft iPhone Data RecoveryMust Read:Jihosoft iTunes Backup Unlocker
If you determine that the charger is not Qi-enabled or everything you’ve tried so far has not worked, you should think about getting a new charger. It is likely that the charger you are currently using along with its components could be damaged. In this next section, we recommend the best wireless chargers for your iPhone.

How to Find Out If Someone Has Blocked Your Number on iPhone

How to Find Out If Someone Has Blocked Your Number on iPhone

#1. Calls

When you call a person who has blocked you, the observation is interesting. In our tests, we found that you hear exactly ONE ring and then you’re diverted to voicemail.

Now, this can happen even if someone will cut the call after one ring but the chances of that are very thin. Try calling multiple times, and when you are cut to voice mail after one ring, you can most likely assume that you’ve been blocked.

Sometimes, the one-ring-then-voice-mail pattern doesn’t happen. Instead, what you hear is a continuous busy tone that gets cut after a while. If the same thing happens no matter when you call, that’s an indication that you’ve been blocked.

#2. “Delivered” on iMessage

I used this trick to figure out the reality. And to a good extent, I succeeded in my mission. So, how did I get through?

Well, I delivered an iMessage to my friend (who had blocked me). Though the message was sent, I didn’t get the “Delivered” confirmation.  Besides, the receiver didn’t get the message.

I sent the message to another friend who is using an Android phone (I had already blocked my number on his phone). The SMS was sent but the receiver didn’t get any notification. However, the message did reach there.

Give this tip a try and I’m pretty sure it can get your job done!

#3. Facetime

Facetime doesn’t give any clue about whether a person has blocked you or not. If you call a person over Facetime, the call will not only go through but keep ringing as if it’s a normal call. The only indication that the call is not truly going through is when you call a person over Facetime at various times, for a continuous period (like a week) and still, your call hasn’t been answered.

#4. Try Calling After Hiding the Caller ID

First things first, it’s not an ideal way to find out whether someone has blocked your phone number or not. You might even be considered undisciplined for disabling your caller ID.

But just in case, you are eager to discover the truth just to remove the confusion, you can use this trick. In many countries, you can use a code in front of your number to disable the caller ID. This way, you can call a person even if you have been blocked. This Caller ID Wikipedia page contains the codes of several countries.

Besides, you also get the option to hide your caller ID right from your iOS device. To do so, open Settings → Phone → Show My Caller ID → then turn off the switch.

Keep in mind that many countries don’t allow the Caller ID to be deactivated. Moreover, you can’t disable it when calling to emergency numbers like 911.

Try Calling from Other Phone Number

This is one of the simplest ways to figure out the truth. If you are unable to make contact using your one number, try a new one. Then, be a bit straightforward and ask whether he/she has barred you from calling or messaging.Jihosoft iPhone Backup Extractor Extract and recover all types of data from iPhone backup files, such as camera roll photos, videos, SMS, contacts, reminders, WhatsApp, and etc.

Gihosoft Free iPhone Data Recovery is a professional iPhone Data Recovery software to get back all your lost text message, photo, video, call history, note, contact and more from iPhone/iPad/iPod Touch.